FPI Sensors International Home Page

The FPI Difference. Products. People. Process.

Navigation

• Home
• News
• Products
• Applications
• Configurator
• About Us
• Contact us

Configurator

 

The below configurator is to help simplify the selection of your custom liquid level float sensor. We have the capability to meet almost all special requests. If you do not see what you want below, please make a note on the form or call us at 1-800-852-9984. We will be happy to help.

After you have made you selections and added any special notes, simply send the form and we will receive the information in a few minutes.

Please call us with any questions 1-800-852-9984

Name Company Email Phone Number Fittings Select Material Stainless Steel PVC Brass Polypropylene Teflon Material Select Size 1/4" NPT 1/2" NPT 3/4" NPT 1 inch NPT 1 1/4" NPT 1 1/2" NPT 2" NPT Flange None Other Size Thread Orientation: Select type Threads up Threads down Conduit Connection Nipple Select type 1/2" NPT Male Thread (standard) None Other Stem Material Select Stem Material Stainless Steel PVC Brass Polypropylene Teflon Float Type Select Material Stainless Steel PVC Buna Polypropylene Teflon Material Select Specific Gravity Standard (.60) 0.93 Other Specific Gravity L1 Actuation Point Normally Open Normally Closed L1 = Enter level actuation point in inches L2 Actuation Point Normally Open Normally Closed L2 = Enter level actuation point in inches L3 Actuation Point Normally Open Normally Closed L3 = Enter level actuation point in inches L4 Actuation Point Normally Open Normally Closed L4 = Enter level actuation point in inches L5 Actuation Point Normally Open Normally Closed L5 = Enter level actuation point in inches Switch Type Select Wattage 50 Watt maximum 100 Watt maximum Wattage Selection Select Circuit SPST (Standard) SPDT Circuit Options Clips or set collars to mount floats Select Clips or Set Collars Clips Set Collars Electrical Connection Options Wire, Cable, Connector Individual Lead Wire Individual Leads, wired with common Cable Cable with Common DIN Connector Other Lead Length Enter Lead Length in Inches Housing Select Housing Options Water Tight Box Cast Aluminum Nema 4 integrity, Cast Iron Nema 7 integrity, Cast Iron Accessories Select Accessory Temperature Switch Weight Stabilizer Adjustable Fitting Compression Connector Fitting (Breakdown for S & H) Centering Disks Flow Regulator Protection Shroud Select Temperature 55 C Normally Closed 60 C Normally Closed 60 C Normally Open 65 C Normally Closed 65 C Normally Open 85 C Normally Closed If Accessory is temperature switch then select temp. Please use comment box for multiple accessory requests.

Email Address info@FPIsensors.net Mailing address 1301 Corporate Center Drive Suite 119 Eagan, MN 55121 1-800-852-9984 Fax 651-681-1888   Configurator Reference

 

Document Information

©2010 FPI Sensors International | Site by

WebleaseUSA.